Freeze Spray

Request Information

Freeze Spray

*=required field

Where To Buy

Articles

Videos

FAQs

Diagnose Faulty Components with Freeze Spray

Techspray freeze spray blasts a fast-evaporating liquid that super-chills isolated areas as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. Freeze spray also increases the visibility of cold solder joints, cracks in printed circuit boards and oxidized junctions.

Choose the freeze spray that best meets your needs:

HFC-134a – Nonflammable and most common for industrial applications.
HFO-1234ze – A newer propellent that is nonflammable, and a much lower GWP than HFC-134a. Ideal for ISO-14000 programs.
Antistatic - Nonflammable HFC-134a propellant with a small amount of antistatic additive to prevent static generation that can damage sensitive components.

Freezer

100% nonflammable diagnostic freeze spray

View Details

Anti-Static Freezer

HFC-134a diagnostic freeze spray for static sensitive assemblies

View Details

Eco-Freezer

HFO-1234ze freeze spray with low global warming potential (GWP)

View Details

FAQ's

How does freeze spray (circuit chiller) work?

Freeze spray typically contains a mixture of volatile substances, either HFC-134a or HFO-1234ze refrigerants, which have a very low boiling point. When the spray is applied to electronic components or circuits, it rapidly evaporates and absorbs heat from the surrounding area. This causes an instant drop in temperature, effectively cooling down the targeted components.

For more details, check out "Using Freeze Spray to Diagnose Faulty Electronics".

What is freeze spray (circuit chiller)?

Freeze spray, also known as circuit chiller or electronic freeze spray, is a type of aerosol spray used in electronics and electrical maintenance. It is designed to rapidly cool down electronic components and circuits for various purposes, such as troubleshooting, identifying faulty components, or locating thermal issues.

For more details, check out "Using Freeze Spray to Diagnose Faulty Electronics".

Does antistatic freeze spray (circuit chiller) leave a residue?

The alcohol additive that gives Antistatic Freeze Spray its antistatic properties evaporates completely, leaving no residue behind.

How can freeze spray (circuit chiller) avoid static build up?

Antistatic Freeze Spray is specifically formulated with dissipative properties to minimize static electricity build-up. These formulations contain additives that help conduct static charges away from the surface being cooled, reducing the risk of damaging sensitive components.

Is computer duster and freeze spray the same?

Technically they are different products for very different purposes. In many cases, though, the chemical contents are very similar or even identical. In those cases, the valve controls whether you spray vapor (duster) or liquid (freeze spray). Although you can turn over the can to spray liquid, in the case of duster, and vapor in the case of freeze spray, you are taking a risk going outside the intended function of the product. For example, if using an HFC-152a based duster, we do not recommend using as a freezer because of its flammable properties.

More FAQs

Articles

Using Freeze Spray to Diagnose Faulty Electronics

Let’s say you are repairing a circuit board, and there’s a faulty component or solder joint somewhere, but you just can’t find it. What do you do? Freeze spray is an important tool for identifying problems on a PCB, because it can help you find those bad components, solder joints, ...

Read This Post

Cleaners Developed to Minimize Global Warming Effect

With global warming in the news and greenhouse gases getting more regulatory attention, electronic and industrial manufacturers are on the look-out for ways to reduce carbon emissions. Techspray has been developing products for over a decade that have much lower Global Warming Potential (GWP), witho...

Read This Post